RODLNK-FM
Nuovo
Disponibile in 4/6 giorni
Attenzione: Ultimi articoli in magazzino!
Disponibile dal:
Rode RodeLink Wireless Filmmaker Kit
Destinatario :
* Campi richiesti
RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE has included an omnidirectional lavalier microphone in the kit to provide the highest possible audio reproduction quality.
RØDELink Filmmaker Kit Caratteristiche
Transmission type | 2.4GHz Fixed Frequency Agile System |
System dynamic range | 112dB |
Range (distance) | Up To 100m |
Frequency range | 35Hz - 22kHz |
Maximum output level | 1v Rms (2.8v P-p) |
Max input signal level | 1v Rms (2.8v P-p) |
Max latency | 4ms |
Receiver (RX-CAM)
Power source | 2 X AA Battery Or MicroUSB |
Antenna | Internal |
Output connection | 3.5mm TRS Locking Jack Socket - Dual Mono |
Output impedance | 300Ω |
Dimensions | 111mm X 65mm X 52mm |
Weight | 190gm |
Transmitter (TX-BELT)
Power source | 2 X AA Battery Or MicroUSB |
Antenna | Internal |
Input connection | 3.5mm TRS Locking Jack Socket |
Input impedance | 10kΩ |
Dimensions | 111mm X 65mm X 40mm |
Weight | 190gm |
Lavalier
Principio Acustico | Permanently Polarized |
Elettronica Attiva | JFET impedance converter |
Capsula | 0.10" |
Direzione di Ripresa | End |
Risposta in Frequenza | 60Hz - 18kHz |
Impedenza di Uscita | 3000Ω |
SPL Massima | 110dB (@1kHz, THD 1% con carico 1kΩ) |
Massimo Livello di Uscita | 189.0mV (@1kHz, THD 1% con carico 1kΩ) |
Sensibilità | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Livello di Rumore Equivalente (pesato A) | 25dB-A |
Livello di Rumore Equivalente (pesato A) | 1.00gm |
Livello di Rumore Equivalente (pesato A) | 12.00mmH x 4.50mmW x 4.50mmD |